ROCK-IT™ drywall repair clips are the easy and inexpensive solution to your drywall repair problems.

ROCK-IT™ clips are self-sticking, holding first to the back of your patch, and then to the front of the existing wall (see How To Use section for more complete directions). Whether you are a do-it yourselfer or in one of the professional trades there are many situations where you will find it handy to have ROCK-IT™ drywall repair clips available.

It is common in both remodeling and during new construction for an electrician to relocate outlets and leave holes in the existing wall. By applying ROCK-IT™ drywall repair clips to the piece from the new cutout, the electrician can easily reuse that piece for patching the hole that was left when the original outlet was moved.

When snaking wires or cables, the same piece that had to be cut out can go right back in by using a couple of ROCK-IT™ clips.

Plumbers, too, very often need access behind walls. Using ROCK-IT™ drywall repair clips makes it easy to put that same piece back in place ready to be taped and spackled.

Painters may want to carry both the ROCK-IT™ drywall repair clips and some small pre-cut drywall pieces for those inevitable repairs.

The same situations occur with carpenters, A/C & heating contractors, wallpaper hangers, maintenance workers, and interior decorators. This is just a small sample of the many professions where ROCK-IT™ drywall repair clips can solve the problem.

The common problem of how to patch a hole in a wall or ceiling when there is no stud available is solved with ease and convenience by using ROCK-IT™ drywall repair clips. Many other products will have you cover the hole with materials such as aluminum or fiber paper, or require you to use nails, screws, or power tools.

ROCK-IT™ clips enable you to patch drywall with drywall without having to create a support behind it. There is no need for nails, screws, or power tools. Using drywall to repair a hole means that when you have finished taping and spackling, your patched area has the same strength and insulating properties as the existing wall. The wall has maintained its integrity.

ROCK-IT™ clip's versatility enables you to use either a 1/2" or 5/8" piece of drywall. If you don't have any drywall to cut a patch from, you can easily purchase a small piece at your local lumberyard.

Using ROCK-IT™ drywall repair clips has many advantages over other methods. They are lightweight, inexpensive, and easy to store. Carry them along with your other tools and supplies.